English

简体中文

English

简体中文

Appearance

Hermes WeChat Integration Tutorial: Smoothly Connect Your Personal WeChat in 5 Minutes (Native Hermes Agent Support, 2026 Latest) ​

Updated: July 6, 2026 | This tutorial applies to the latest version of Hermes Agent and covers the full Hermes WeChat integration process: dependency installation, gateway configuration, authorization settings, binding verification and common troubleshooting.

Hermes Agent now officially supports personal WeChat natively! No public IP, no server setup, no complex third-party relay — just scan the QR code with your phone's WeChat and the binding is done. Private chats, group chats, images, videos, files and voice messages are all supported, with long-polling direct connection for a smooth, seamless experience.

If you've been searching for "Hermes WeChat integration", "how to connect Hermes to WeChat" or "Hermes WeChat tutorial", this image-rich beginner tutorial is built for getting started quickly — tested end to end, and the whole Hermes-to-personal-WeChat binding takes under 5 minutes.

📑 Table of Contents (Click to Jump) ​

🧩 Prerequisites

Before starting the Hermes WeChat integration, make sure the following are in place:

  • Hermes Agent is installed (if not, refer to the official Hermes documentation to complete the installation)
  • Your local Python version is 3.10 or higher
  • A personal WeChat account that can log in normally (note: WeChat Work / Enterprise WeChat is not supported yet)
  • The WeChat mobile client has a working network connection (for QR-code binding)

Once all of the above is satisfied, you can start configuring the Hermes WeChat gateway.

🔧 Step 1: Update and Install Dependencies

Open a terminal and run these commands in order to prepare the environment for the Hermes WeChat integration:

bash
# Install the required Python dependency packages
pip install aiohttp cryptography

# Optional: terminal QR code display (strongly recommended for easy scanning)
pip install qrcode

# Update Hermes to the latest version (a key prerequisite for WeChat support)
hermes update

💡 Tip: If hermes update still says WeChat gateway is unsupported, the local version cache may not have refreshed — try reopening the terminal and running it again.

⚙️ Step 2: Interactive WeChat Gateway Configuration (hermes gateway setup)

This is the most critical step in the Hermes WeChat integration flow. We recommend using the terminal's interactive configuration, which is the simplest to operate:

bash
hermes gateway setup

Configuration steps:

  1. In the gateway type list, select the Weixin / WeChat option
  2. Enter Y to confirm the connection
  3. Hermes will automatically request the iLink Bot API and generate a dedicated WeChat binding QR code

Scan and add it with your WeChat on your phone — the whole process typically responds within seconds.

Hermes WeChat gateway configuration screen

🔐 Step 3: Authorization Settings (Private and Group Chats)

After configuration, the system will prompt you to set an authorization policy. This step directly decides who can talk to Hermes in WeChat.

  • DM Pairing Approval (strongly recommended): strangers must be manually approved before their first DM; approved contacts pass through directly afterward. This balances security and convenience, and suits most personal Hermes WeChat integration scenarios.
  • Open: any DM automatically passes, suitable for fully public external scenarios.
  • Disable: completely turns off DM functionality.
  • Keeping the default Disable is recommended, to avoid being spammed by irrelevant group messages.
  • Later, you can manually enable authorization for specific work groups or study groups in the Hermes configuration.

Hermes WeChat authorization settings screen

🚀 Step 4: Restart the Gateway and Complete the Binding

After saving the authorization settings, restart the gateway to apply the configuration:

bash
hermes gateway restart

Once the restart succeeds, complete the final binding as follows:

  1. Find Hermes in WeChat and send any message
  2. Hermes will automatically reply with an authorization code
  3. Paste that authorization code back into the terminal to complete the binding; alternatively, send the /whitelist command directly in WeChat to add yourself to the whitelist automatically

Hermes WeChat binding success

At this point, the entire Hermes WeChat integration process is complete!

❓ FAQ

Q1: When integrating Hermes with WeChat, nothing happens after I scan the QR code. What should I do? A: First confirm your phone's network is working, then re-run hermes gateway setup to generate a new QR code and try again.

Q2: What if the Hermes WeChat binding QR code has expired? A: The terminal will tell you the QR code has expired. At that point simply re-run hermes gateway setup to refresh and generate a new code.

Q3: How do I fix a Hermes WeChat gateway restart failure? A: First run hermes gateway status to check the current gateway status. If the restart failed due to a port conflict, modify the listening port in the config file and try again.

Q4: After integrating Hermes with WeChat, why don't I receive messages? A: Check your authorization settings — confirm whether DMs are set to Disable, or whether the corresponding group chat hasn't been enabled for authorization.

Q5: What message types does the Hermes WeChat integration support? A: It currently supports text, images, videos, files and voice messages, covering essentially all everyday WeChat communication scenarios.

Q6: Does the Hermes WeChat integration need a public IP or a server? A: No. The Hermes WeChat gateway uses long-polling to connect directly to the iLink Bot API, so the entire setup can be completed in a local environment without buying a server or configuring a public IP.

✨ What You Can Do After Connecting Hermes to WeChat

After completing the Hermes WeChat integration, you can immediately unlock these common use cases:

  • Personal AI assistant in DMs: ask Hermes anytime to look things up, write summaries, translate or brainstorm creative copy
  • Group chat assistant: pull Hermes into work/project groups to auto-organize meeting notes and extract action items
  • Automated push: combined with scheduled tasks, push daily weather, schedules, RSS news, stock alerts and more
  • Multimedia processing: send images, voice recordings or files directly in WeChat for Hermes to analyze and process intelligently

The Hermes WeChat integration dramatically lowers the barrier to using an AI assistant, letting Hermes truly blend into daily communication and become an intelligent productivity tool in your pocket.

📌 Final Thoughts

That wraps up the latest 2026 Hermes WeChat integration tutorial, covering dependency installation, gateway configuration, authorization policy, binding verification and high-frequency troubleshooting. If you run into other issues during setup, feel free to leave a comment below — this article will be continuously updated and maintained.

Happy Hacking 🎉

For more practical Hermes tips and advanced WeChat integration tricks, keep following this site to get the latest tutorial updates first.

Contact<br>me